MPE/iX Error Messages Manual Vol 1 (32650-90878)

18 Chapter2
Command Interpreter
(CIERR)
199 MESSAGE NO LOCKWORDS ALLOWED IN :FILE FORMAL
DESIGNATORS. (CIERR 199)
CAUSE You have included a lockword in your FILE statement;
this is not allowed.
ACTION Reenter the file equation, leaving out the lockword. To
review the syntax of the FILE command, invoke the online
Help Facility or refer to the MPE/iX Commands Reference
Manual.
200 MESSAGE MORE THAN 200 PARAMETERS TO BUILD COMMAND.
(CIERR 200)
CAUSE You have included more than 200 parameters in your
BUILD command; this is not allowed.
ACTION Reenter the BUILD command; limit the number of
parameters to 30 or less. To review the syntax of this
command, invoke the online Help Facility or refer to the
MPE/iX Commands Reference Manual.
201 MESSAGE NAME OF FILE TO BE BUILT IS A REQUIRED
PARAMETER. (CIERR 201)
CAUSE You have failed to enter a filename in the BUILD
command.
ACTION Reenter the FILE command, specifying a filename. To
review the syntax of this command, invoke the online Help
Facility or refer to the MPE/iX Commands Reference
Manual.
202 MESSAGE FILE CODE MISSING, DEFAULTED TO 0. (CIWARN
202)
CAUSE You did not supply a file code value to the command.
System used a default value.
ACTION No action is required, unless the default value is not what
you desired.
203 MESSAGE MORE THAN 200 PARAMETERS TO FILE COMMAND.
(CIERR 203)
CAUSE You have included more than 200 parameters in your
FILE command; this is not allowed.
ACTION Reenter the FILE command; limit the number of
parameters to 30 or less. To review the syntax of this
command, invoke the online Help Facility or refer to the
MPE/iX Commands Reference Manual.
204 MESSAGE FILE COMMAND REQUIRES AT LEAST TWO
PARAMETERS, INCLUDING THE FORMAL NAME OF THE
FILE. (CIERR 204)
CAUSE You have specified less than two parameters in your FILE