MPE/iX Error Messages Manual Vol 1 (32650-90878)

166 Chapter3
Command Interpreter
(CIERR) 1901-12256
2034)
CAUSE Internal error.
ACTION There is no action that you can take.
2035 MESSAGE TRYING TO SEARCH FOR UDCS ON NONEXISTENT
LEVEL (CIERR 2035)
2036 MESSAGE BAD UDC COMMAND ENTRY, NOT MATCH FILE - NOT
EXECUTED (CIERR 2036)
2037 MESSAGE TOO MANY CHARACTERS IN PARAMETER NAME, 255
MAXIMUM (CIERR 2037)
CAUSE The parameter name definition in a UDC or user
command file exceeded the maximum character length of
255 characters.
ACTION Reenter the command making sure the parameter name
definition contains less than 255 characters.
2038 MESSAGE TOO MANY CHARACTERS IN PARAMETER VALUE, 255
MAXIMUM (CIERR 2038)
CAUSE The parameter value exceeded the maximum character
length of 255 characters.
ACTION Reenter the command making sure the parameter value
contains less than 255 characters.
2039 MESSAGE PARAMETERS DO NOT MATCH USER COMMAND
DEFINITION. (CIERR 2039)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
2040 MESSAGE UDC DIRECTORY BUILD FAILED ON OBJECT (CIERR
2040)
CAUSE Internal error.
ACTION There is no action you can take.
2041 MESSAGE UDC DIRECTORY BUILD FAILED, CAN NOT ACCESS
FILE (CIERR 2041)
2042 MESSAGE UDC FILE NAME TOO LONG (CIERR 2042)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
2043 MESSAGE NO PROCESS TO BUILD UDCS, FATAL ERROR (CIERR
2043)
CAUSE Internal error.
ACTION Call your support representative.
2044 MESSAGE ASTERISK CHARACTER LINE ALREADY SEEN IN UDC