MPE/iX Error Messages Manual Vol 1 (32650-90878)

Chapter 2 115
Command Interpreter
(CIERR)
1393 MESSAGE COMPRESSION REQUEST NOT HONORED. REMOTE DOES
NOT SUPPORT THIS FEATURE. (CIWARN 1393).
CAUSE Same as message content.
ACTION None. Information only.
1394 MESSAGE COMPRESSION PARAMETER RESPECIFIES AND
OVERRIDES PREVIOUS COMPRESSION PARAMETER.
(CIWARN 1394)
CAUSE Same as message content.
ACTION None. Information only.
1395 MESSAGE OPEN PARAMETERS ENTERED ON A CLOSE REQUEST
ARE IGNORED. (CIERR 1395)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
1396 MESSAGE AN ID LIST MUST CONTAIN 255 OR LESS ELEMENTS.
(CIWARN 1396)
CAUSE Same as message content.
ACTION None. Information only.
1397 MESSAGE AN UNNECESSARY DELIMITER IS IGNORED. (CIWARN
1397)
CAUSE Syntax error.
ACTION None. Information only.
1398 MESSAGE THERE ARE NO DS LINES OPEN. (CIWARN 1398)
CAUSE Same as message content.
ACTION Reenter the command when there are DS lines open.
1399 MESSAGE MULTIPLE USE OF ! IS REDUNDANT AND IGNORED.
(CIWARN 1399)
CAUSE Syntax error.
ACTION None. Information only.
1400 MESSAGE WRONG DEVICE PASSWORD: ACCESS DENIED. (CIERR
1400)
CAUSE Syntax error.
ACTION Reenter the command making sure the correct device
password is specified.
1401 MESSAGE COMMAND IMAGE TOO LONG, MAXIMUM 243
CHARACTERS. (CIERR 1401)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.