MPE/iX Error Messages Manual Vol 1 (32650-90878)

114 Chapter2
Command Interpreter
(CIERR)
1324 MESSAGE FROM ADDRESS MUST BE BETWEEN 1 AND 15
CHARACTERS INCLUSIVE. (CIERR 1324)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
1325 MESSAGE TO ADDRESS MUST BE BETWEEN 1 AND 15
CHARACTERS INCLUSIVE. (CIERR 1325)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
1326 MESSAGE FROM AND TO ADDRESS MUST BE A DECIMAL NUMBER.
(CIERR 1326)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
1350 MESSAGE INVALID OPTION SPECIFIED. MUST BE ONE OF:
STATUS, ALLOCATE, AUTO, ALL. (CIERR 1350)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
1351 MESSAGE EXTRA PARAMETER SPECIFIED. COMMAND IGNORED.
(CIERR 1351)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
1389 MESSAGE INVALID OR MISSING DELIMITER FOR SELECTION
SIGNAL SEQUENCE. (CIERR 1389)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
1390 MESSAGE SELECTION SIGNAL SEQUENCE MUST BE FROM 1 TO
30 CHARACTERS. (CIERR 1390)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
1391 MESSAGE BOTH QUEUE AND NOQUEUE SPECIFIED; NOQUEUE
USED. (CIWARN 1391)
CAUSE Same as message content.
ACTION None. Information only.
1392 MESSAGE ONLY ! WORDS WERE ALLOCATED FOR THE LINE
BUFFER. (CIWARN 1392)
CAUSE Same as message content.
ACTION None. Information only.