MPE/iX Error Messages Manual Vol 1 (32650-90878)

Chapter 2 113
Command Interpreter
(CIERR)
ACTION Reenter the command making sure the LINEBUF value
entered is within the range of 304 to 4096.
1316 MESSAGE UNABLE TO COMPLETE THE REMOTE COMMAND. (CIERR
1316)
CAUSE Same as the message.
ACTION Retry the operation.
1317 MESSAGE NOT A CURRENTLY AVAILABLE DSLINE. (CIERR
1317)
CAUSE The line specified with the DSLINE command is not
available.
ACTION Reenter the DSLINE command making sure that an
available line is specified.
1318 MESSAGE USE OF EXCLUSIVE REQUIRES BOTH ND AND CS
CAPABILITY. (CIERR 1318)
CAUSE User does not have Access to nonsharable I/O devices (ND)
and Create Volumes (CV) capabilities.
ACTION Ask your system manager to assign ND and CV
capabilities to your user name.
1319 MESSAGE THE DS LINE #L! IS IN USE BY A PROGRAM OR
SUBSYSTEM AND CANNOT BE CLOSED. (CIERR 1319)
CAUSE A request to close a DS line was issued for a line in use by
another program or subsystem.
ACTION None; the message is for information only.
1320 MESSAGE EXPECTED A RESPONSE OF YES, Y, NO OR N.
(CIERR 1320)
CAUSE The response entered was not "YES", "Y", "NO" or "N".
ACTION Enter a response of "YES", "Y", "NO" or "N".
1321 MESSAGE UNABLE TO OPEN THE DS LINE ON DEVICE !.
(CIERR 1321)
CAUSE Same as the message.
ACTION Check with your system manager.
1322 MESSAGE @ IS INVALID IN THIS CONTEXT. (CIERR 1322)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
1323 MESSAGE A DSLINE OPEN REQUIRES A VALID DS DEVICE NAME
AS THE FIRST PARAMETER. (CIERR 1323)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.