MPE/iX Error Messages Manual Vol 1 (32650-90878)

Chapter 2 109
Command Interpreter
(CIERR)
CAUSE A parameter other than DEV= was entered.
ACTION Reenter the command using only DEV= as a parameter.
1223 MESSAGE ERROR PERFORMING CHANGELOG (CIERR 1223)
CAUSE Same as the message.
1225 MESSAGE EXPECTED LOGGING IDENTIFIER NAME (CIERR 1225)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
1226 MESSAGE LOGGING IDENTIFIER LENGTH > 8 CHARACTERS
(CIERR 1226)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command making sure
the logging identifier length is less than or equal to eight
characters..
1227 MESSAGE NO SPECIAL CHARACTERS ALLOWED HERE (CIERR
1227)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
1229 MESSAGE COMMAND HAS ONLY ONE PARAMETER (CIERR 1229)
CAUSE Too many parameters specified.
ACTION Check the syntax and reenter the command.
1230 MESSAGE NO LOGGING PROCESS CURRENTLY RUNNING (CIWARN
1230)
CAUSE Same as message content.
ACTION None. Information only.
1231 MESSAGE NO LOGGING IDENTIFIERS ASSIGNED (CIWARN 1231)
CAUSE Same as message content.
ACTION None. Information only.
1232 MESSAGE LOGGING PROCESS NOT CURRENTLY RUNNING. (CIERR
1232)
CAUSE Same as message content.
ACTION None; the message is for information only.
1233 MESSAGE EXPECTED "PASS" KEYWORD (ULOGERR 1233)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
1234 MESSAGE ONLY THE CREATOR CAN USE THIS PARAMETER
(ULOGMSG 1234)