Installation/Upgrade Procedures for SHAREPLEX

SHAREPLEX
1-6
_____
2.1 Run the NBINST installation program:
:HELLO MANAGER.SYS, PUB
:SETJCW NBDISABLE=FATAL
:RUN NBINST.PUB.NETBASE;INFO="INSTALL"
NetBase/NFS Auto-Install Program [x.x] Update n (C) QUEST Software 1996
Ready to install NetBase? Y
PHASE 1 - CHECK CURRENT INSTALLATION
PHASE 2 - CHECK SYSTEM SL STRUCTURE
PHASE 3 - SCAN SYSTEM SL
PHASE 4 - CREATE NETBASE SL
PHASE 5 - INSTALL NETBASE SYSTEM SEGMENTS
PHASE 6 - UPDATE SYSTEM SL
PHASE 7 - OCT THE NETBASE SL
PHASE 8 -OCT THE NETBASE SYSTEM SEGMENTS
PHASE 9 -INSTALL NATIVE MODE NETBASE
Now shutdown and retart the system
END OF PROGRAM
The above example shows a typical NBINST display. The actual number of steps or the
text of each step may vary from installation to installation.
Note: If you receive an error stating that the NetBase Segmented Library is in use when
running NBINST.PUB.NETBASE, ensure that NetBase is disabled by running
NBVERS.PUB.NETBASE,STATE. If it is disabled, it may be that the network is using
the library RTMSL.PUB.SYS. Stop the network by issuing the NETCONTROL STOP
command and try running NBINST again.
_____ 2.2 After the successful completion of the NetBase installation program, the system
MUST be shut down and restarted.