HP System Dictionary/XL General Reference Manual Vol 2 - Part 1 SDINIT (32256-90005)

2- 16
| 7 Capacity for user defined N-ary RELATIONSHIP TYPES is xxx |
| 8 Capacity for average no. attributes associated to ET & RT is xxx|
| 9 Capacity for DOMAINS is xxx |
| 10 Capacity for ENTITY names is xxx |
| 11 Capacity for total versions of ENTITIES is xxx |
| 12 Capacity for binary RELATIONSHIPS is xxx |
| 13 Capacity for N-ary RELATIONSHIPS is xxx |
| 14 Capacity for total versions of RELATIONSHIPS is xxx |
| 15 Capacity for FIXED LENGTH ATTRIBUTE DATA is xxx |
| 16 Capacity for FIXED LENGTH ATTRIBUTE EDIT DATA is xxx |
| 17 Capacity for VARIABLE LENGTH ATTRIBUTE DATA is xxx |
| 18 Capacity for SCOPES is xxx |
| 19 Capacity for SCOPE/ENTITY associations is xxx |
| 20 Capacity for SCOPE/RELATIONSHIP associations is xxx |
| 21 Capacity for SCOPE/DOMAIN associations is xxx |
| 22 Capacity for VERSIONS is xxx |
| 23 Capacity for VERSION LOGGING is xxx |
| 24 DONE |
| |
| Enter code > |
| |
__________________________________________________________________________
You can now alter the capacity of any item by entering the appropriate code number next to that item.
Valid responses are code numbers 1 through 24, [[RETURN]], and [[CONTROL]] Y. Any other response
will result in an error and Enter code> will be reprompted.
• If you enter code 1, you will be prompted for a new capacity for each of the dictionary components. After
the last item is prompted, the entire capacity list is displayed, giving you another chance to verify its
correctness. If you enter [[CONTROL]] Y while being prompted for the capacities, SDINIT will discon-
tinue prompting and list the current capacities, allowing you to verify the list.
• If you enter any number from 2 to 23, you may alter a specific capacity. If, for example, you enter code
3, the prompt will be:
New Capacity for user defined ATTRIBUTES (xxx) >>
If you enter [[RETURN]] or [[CONTROL]] Y to this prompt, the default value will be used.
• The prompt Enter code > is repeated until a [[RETURN]], code 24, or [[CONTROL]] Y is entered. If any
of these responses are entered, the capacities are listed, allowing you to verify them.
Once the capacities are correct, you are then prompted for external and internal names for the first version
in the common domain and the DA scope, and then the password for the DA scope. All of these names are
user-supplied. Any names that are meaningful to your particular application can be used. Every definition
in the dictionary, whether it is a structural component such as entity type or an actual entity occurrence,
has both an internal name and an external name associated with it. The internal name can never
change and is designed to be used by software products which interface with the dictionary and rely on a
given name for identification purposes. The external name is intended for end users of the dictionary and
can be changed through the SDMAIN program. If not specified, the internal name defaults to the same
name as the external name. Once, however, the internal name is chosen, the only way to change the name
is to initialize a new dictionary with a different internal name. For a complete discussion of scopes,
versions, and domains, refer to Chapter 4 of the HP System Dictionary/XL General Reference Manual,