HP SNMP/XL User's Guide (36922-90036)

Chapter 3 45

Using SNMPUTIL

SNMP Command Files

Description

SNMPTRAP allows you to generate a trap to a single node in the network

or a trap that is routed to each of the management stations that are

listed in the trap-destination list in the SNMP conﬁguration ﬁle.

This command requires PM and DI capabilities, in addition to the

normal NM capability required for all of the SNMP command set.

Example

The following example sends a linkUp trap to node xlnode2 from

xlnode1 with the default enterprise name and time_stamp.

MPEXL: snmptrap 0 public 0 192.1.27.63 6 1234 0

The snmp trap was successfully sent (SNMPINFO 1813)

MPEXL: