HP e3000/iX Network Planning and Configuration Guide (36922-90037)
88 Chapter5
Introductory Screens
To Begin the Configuration Process
Fields
Local Domain
Name The name of this system in the ARPANET standard
format. This name can be used by other nodes on the
network to access this host.
The domain name is composed of labels, with each label
separated by a period. Each label must start with a
letter or digit, and have as interior characters only
letters, digits, hyphens (-), or underbars (_). A domain
name may have any number of labels, but its total
length, including periods, is limited to 255 characters.
label[.label][...]
Domain names are not case sensitive.
Use of domain names is optional. If you are not using
domain names for network access, leave the local node
name in this field.
To Perform Guided Network Transport
Configuration
The Network Transport Configuration screen (#42) in Figure 5-5 is
displayed if you press the
[Guided Config] key at the NS Configuration
screen (#166) in Figure 5-4.
Figure 5-5 Network Transport Configuration Screen