HP e3000/iX Network Planning and Configuration Guide (36922-90037)

211
C NS X.25 Migration: NS 3000/V to
NS 3000/iX Release 2.0 or Later
This Appendix tells how to use the NMMGRVER utility to migrate
(update) configuration files from a node running NS X.25 3000/V Link
to a node that will be running NS 3000/iX release 2.0 or later. This
appendix does not apply if an MPE V based node is being used as an
X.25 server for NS 3000/XL based machines. Refer to the following
appendixes depending on which X.25 network products you currently
have:
• For migrating a node’s configuration file from NS 3000/XL releases
1.0, 1.1, or 1.2 to NS 3000/iX release 2.0 or later, refer to Appendix B,
“NS X.25 Migration: NS 3000/XL Releases 1.0, 1.1, or 1.2 to
NS 3000/iX Release 2.0 or Later.”
• For migrating a configuration file from any MPE V based node acting
as an X.25 server for NS 3000/XL based machines (including the NS
X.25 3000/XL Server product) to an NS 3000/iX node that will be
running NS 3000/iX release 2.0 or later, refer to Appendix D, “NS
X.25 Migration: NS 3000/V and NS 3000/XL Release 1.X to iX
Release 2.0 or later.”
• For migrating a configuration file from a node running NS 3000/V
PAD to an NS 3000/iX node that will be running NS 3000/iX
release 2.0 or later, refer to Appendix E, “NS X.25 Migration:
NS 3000/V PAD Access to NS 3000/iX Release 2.0 or Later.”
This Appendix also provides an overview of the differences between
networking functionality on an MPE V and an MPE/iX system you need
to consider for migration.