HP e3000 MPE/iX System Software Maintenance Manual (Release C.75.00) (30216-90344)

Appendix H
Error Messages and Warnings
Stage/iX Messages (STAGEMAN)
405
Action Check your spelling on the command.
1308 Message This command is not yet supported. (STAGEMAN 1308)
Cause The user has selected a command which is not supported in this version of
STAGEMAN, and therefore cannot be executed.
Action None
1309 Message This command has no associated functionality. (STAGEMAN 1309)
Cause The user has selected a command which should be valid, but is not
internally recognized by STAGEMAN. This signifies a problem with the
STAGEMAN utility.
Action Report this problem to your Hewlett-Packard Response Center.
1310 Message Error in accessing message catalog. (STAGEMAN 1310)
Cause STAGEMAN could not access its message catalog file, STAGE000.PUB.SYS.
Action Make sure the catalog file exists and is not opened exclusively by another
process.
1311 Message Invalid numeric index into command history stack. (STAGEMAN
1311)
Cause The user has specified a value for the DO or REDO command which does not
match a corresponding value in the command history stack.
Action None
1312 Message Command name length exceeds 16 characters. (STAGEMAN 1312)
Cause The length of the command name specified by the user is greater than the
maximum command length allowed by STAGEMAN (currently 16
characters).
Action None
1313 Message Insufficient capabilities to execute this command. (STAGEMAN
1313)
Cause In order to execute commands which modify the HP Stage/iX
environment, STAGEMAN requires users to have System Manager (SM)
capability. To execute “read only” commands (LIST, for example) the user
must have at least System Operator (OP) capability. This error indicates
that one or both of these rules have been broken.
Action Alter the user to have the required capability, or run STAGEMAN under
another user.
Message 1314-1317 not used.
1318 Message Command only valid in interactive mode. (STAGEMAN 1318)
Cause The command was issued in batch mode (in a file specified by USE, for
example), but is only appropriate in interactive mode.
Action Execute the command in interactive mode.
1319 Message 1319 not used.
1320 Message Invalid command edit operation. (STAGEMAN 1320)