HP e3000 MPE/iX System Software Maintenance Manual (Release C.75.00) (30216-90344)

Appendix H
Error Messages and Warnings
Stage/iX Messages (STAGEMAN)
401
Cause STAGEMAN received a bad status from the FFILEINFO intrinsic while
attempting to get data on the file (this data is needed for placing an entry
for the file in the system LIF Directory so that the file is accessible from
the ISL prompt).
Action Contact your Hewlett-Packard Response Center for assistance.
1142 Message Failed to get the sector address of file “name”. (STAGEMAN 1142)
Cause STAGEMAN received a bad status from an internal routine while
attempting to get the sector address of the file (this address is needed for
placing an entry for the file in the system LIF Directory so that the file is
accessible from the ISL prompt).
Action Contact your Hewlett-Packard Response Center for assistance.
1143 Message Got a bad sector address on file “name”. Address = value (STAGEMAN
1143)
Cause STAGEMAN got a sector address on the file that was less than or equal to
zero (this address is needed for placing an entry for the file in the system
LIF Directory so that the file is accessible from the ISL prompt).
Action Contact your Hewlett-Packard Response Center for assistance.
1144 Message File “name” has a zero EOF. Can't place in bootable file directory (LIF).
(STAGEMAN 1144)
Cause STAGEMAN attempted to place the file in the system LIF Directory (so
that the file is accessible from the ISL prompt), but the file is empty.
Action Contact your Hewlett-Packard Response Center for assistance.
1145 Message File “name” is not contiguous. Can't place in bootable file directory (LIF).
(STAGEMAN 1145)
Cause STAGEMAN attempted to place an entry for the file in the system LIF
Directory (so that the file is accessible from the ISL prompt), but the file
on disk is not contained within a single extent. Since ISL can only handle
single-extent files, this is an error.
Action If possible, determine how the file ended up a multiple extent file (the
number of extents can be displayed with the LISTF[ILE] ,2 command).
To fix the problem, you can re-stage the file with STAGEFILE
;DISK=CONTIG (do an Expert Mode HELP on STAGEFILE for more
information).
1146 Message Got a bad date string: “name”. (STAGEMAN 1146)
Cause STAGEMAN encountered an internal error in trying to convert the date
and time data for output.
Action Contact your Hewlett-Packard Response Center for assistance.
1147 Message Failed to convert date with ALMANAC. (STAGEMAN 1147)
Cause STAGEMAN received a bad status from the ALMANAC intrinsic while
attempting to convert the date and time stamp for output.
Action Contact your Hewlett-Packard Response Center for assistance.
1148 Message Failed to open the LIF Directory. (STAGEMAN 1148)