HP e3000 MPE/iX System Software Maintenance Manual (Release C.75.00) (30216-90344)

Appendix H
Error Messages and Warnings
Stage/iX Messages (STAGEMAN)
398
Cause STAGEMAN found an unexpected file disposition value for the file (the
file disposition should be ADD, REPLACE, or DELETE). This indicates a
problem with the HP Stage/iX facility, and should be reported to
Hewlett-Packard.
Action Contact you Hewlett-Packard Response Center for assistance.
1107 Message Found a bad error action value for file “name”.(STAGEMAN 1107)
Cause STAGEMAN found an unexpected file error action value for the file (the
error action should be WARN or IGNORE). This indicates a problem with
the HP Stage/iX facility, and should be reported to Hewlett-Packard.
Action Contact you Hewlett-Packard Response Center for assistance.
1108 Message Failed to open file “name” in the staging area. (STAGEMAN 1108)
Cause STAGEMAN received a bad status from the HPFOPEN intrinsic during
an attempt to open the file. There should be a file system error message
associated with this one that explains why.
Action Determine why the file could not be opened, correct the problem, then
re-execute the command.
1109 Message Could not find file “name” in the staging area. (STAGEMAN 1109)
Cause STAGEMAN expected the file to exist but could not find it.
Action Determine why the file does not exist, correct the problem, then re-execute
the command.
1110 Message Failed to open file “name” in the staging area for purging. (STAGEMAN
1110)
Cause STAGEMAN received a bad status from the HPFOPEN intrinsic during
an attempt to open the file. There should be a file system error message
associated with this one that explains why.
Action Determine why the file could not be opened, correct the problem, then
re-execute the command.
1111 Message Failed to purge file “name” in the staging area. (STAGEMAN 1111)
Cause STAGEMAN received a bad status from the FCLOSE intrinsic while
attempting the purge the file from the staging area (FCLOSE ,PURGE
option).
Action Determine why the FCLOSE failed, correct the problem, then re- execute
the command.
1112 Message Failed to close file “name” in the staging area. (STAGEMAN 1112)
Cause STAGEMAN received a bad status from the FCLOSE intrinsic while
attempting the close the file.
Action Determine why the FCLOSE failed, correct the problem, then re-execute
the command.
1115 Message Failed to find the staging area in the Globals file. (STAGEMAN
1115)