HP e3000 MPE/iX System Software Maintenance Manual (Release C.75.00) (30216-90344)

Appendix H
Error Messages and Warnings
Stage/iX Messages (STAGEMAN)
389
Cause STAGEMAN could not find the import file to be unpacked into the Import
directory. The file it expects to unpack in the Import directory always has
the same name as the staging area (e.g.,
/SYS/hpstage/import/stage_name).
Action Make sure that the “unpack” file is named properly and is in its proper
location (see above), then re-execute the command.
1048 Message Can't use reserved word “BASE_ARCHIVE” for staging
area name. (STAGEMAN 1048)
Cause The user specified the string “BASE_ARCHIVE” for the staging area.
STAGEMAN uses the staging area name for building a directory under
/SYS/hsptage/ (/SYS/hpstage/stage_name). Since
/SYS/hpstage/base_archive is a reserved directory in the HP Stage/iX
environment, “BASE_ARCHIVE” cannot be used as a staging area name.
To avoid confusion, the check for “BASE_ARCHIVE” is not case sensitive.
Action Choose another staging area name. You may you the string
“BASE_ARCHIVE” within a staging area name (e.g., “Base_Archive_1”).
1049 Message Failed to copy the contents file for staging area “name” to the Export
directory. CIERROR = value (STAGEMAN 1049)
Cause STAGEMAN encountered a Command Interpreter (CI) error while
attempting to move the staging area “contents” file from the staging area
directory to the Export directory for exporting.
Action Determine the cause of the CI error, correct the problem, and re- execute
the command.
1050 Message ADD file “name” exists in the Base.(STAGEMAN 1050)
Cause The file was staged with a disposition of “ADD” — meaning the file is
expected to be new to the Base - but a version of the file was found in the
Base.
Action Remove the Base version of the file, or re-stage the file with a disposition
of “REPLACE” (do an Expert Mode HELP on STAGEFILE for more
information.
1051 Message No entry for “name” was foundin the contents file for “name”.
(STAGEMAN 1051)
Cause STAGEMAN could not find a record in the contents file in which the
natural filename field match the filename specified by the user.
Action None
1052 Message Found illegal disk restriction parameter. (STAGEMAN 1052)
Cause A value was passed to a command's disk restriction parameter that
STAGEMAN does not understand. This indicates a problem with the
STAGEMAN utility.
Action If you encounter this error, report it to your Hewlett-Packard Response
Center.
1053 Message Found illegal file disposition parameter. (STAGEMAN 1053)