HP e3000 MPE/iX System Software Maintenance Manual (Release C.75.00) (30216-90344)

Appendix G
HP Stage/iX Reference
HP Stage/iX Commands
302
The name of the HP Stage/iX staging area to be VALIDATED. This must be a legal staging area name for a
pre-existing staging area. The staging area cannot be in use or designated for use on the next boot (see the
SET command).
Staging area names are case sensitive. “STAGE1” is not equivalent to “stage1” or “Stage1”.
Expert Mode Parameter:
[;{NOOVERRIDE}] (optional)
{ OVERRIDE}
If ;OVERRIDE is specified, then STAGEMAN will set the valid flag without checking to see if the contents of the
staging area are really valid. Otherwise, STAGEMAN will validate that each file is actually in the staging area,
that each file is OK (for example, disk space restrictions are observed), and any additional checking that may
be performed on a file by file basis (see the STAGEFILE command).
The default value for this parameter is ;NOOVERRIDE.
Example
STAGEMAN> VALIDATE STAGE=stage_1