HP e3000 MPE/iX System Software Maintenance Manual (Release C.75.00) (30216-90344)

Appendix D
Backdating Your System
Performing the Backdate
204
The file equation from the tape device, which is used to
restore files and create the CSLT, defaults to 'DEV=TAPE'.
If you prefer to designate a different device, enter its LDEV
number now (RETURN for default)>>
Press Return to use the default device class TAPE or enter the LDEV number of the tape device. The
device you specify applies to all tape requests.
4. Restore FOS files.
This step takes about 20–45 minutes.
a. Mount FOS tape and reply to tape request when the following message displays.
Mount the FOS tape and put the tape drive online. The files from
the FOS tape will now be restored.
**** PLEASE STAND BY ****
The FOS tape files are being restored.
`CREATE' OPTION DEFAULTING TO `CREATE=ACCOUNT,GROUP,CREATOR'
BASED ON YOUR CAPABILITIES (S/R 502)
STORE/RESTORE VERSION A.nn.nn (C) HEWLETT-PACKARD CO.
b. Dismount the FOS tape when the restore complete message displays.
The files from the FOS tape were successfully restored.
AUTOINST creates the accounting structure. Progress messages display throughout this 5 minute
process.
Creating accounting structure #J1
13:36/#J1/43/LOGON FOR: “SUPACCT,MANAGER.SYS,PUB”...
13:36/#J1/26/FROM/MANAGER.SYS/
13:36/#J2/26/FROM/MANAGER.SYS/Now running SUPACCT job
13:36/#J2/26/FROM/MANAGER.SYS/
13:36/#J2/26/FROM/MANAGER.SYS/Finished running SUPACCT job
13:41/#J6/43/LOGOFF ON LDEV #10.
The accounting structure has been successfully created.
5. Respond to SUBSYS prompt.
If you have a SUBSYS, enter Y at the prompt. Proceed to Step 6.
If you do not have a SUBSYS, enter N at the prompt, Proceed to Step8.
Has a SUBSYS tape been included in your installation package
(y/n)?
6. Restore SUBSYS files.
This step takes about 20–45 minutes.
a. Mount SUBSYS tape and reply to tape request (for SUBSYS and PowerPatch tape, if applicable)
when the following message displays.
Mount the SUBSYS tape and put the tape drive online.
The HP-Supported software files will be restored.
***** PLEASE STAND BY *****
The HP-Supported software files are being restored.
CREATE' OPTION DEFAULTING TO `CREATE=ACCOUNT,GROUP,CREATOR'