HP e3000 MPE/iX System Software Maintenance Manual (Release C.75.00) (30216-90344)

Chapter 7
Support Tools Manager (STM) for MPE/iX
Running STM (Summary)
161
Running STM (Summary)
To start STM and run support tools:
1. Enter the command for the interface. Enter cstm (command-line version)
2. If you want to test a remote machine, select the computer system to test. The remote machine must be
running a compatible version of STM (i.e., the version running on the system you wish to connect to must
be identical to, or a later version than, the version running on the system you are connecting from).
3. Select one or more devices from the system map that is displayed.
4. Choose a support tool (for example a verifier) to run on the selected device(s).
5. Results appear on the system map. For example the entry for a tested device may say “Successful” or
“FAILED.”.
6. If the device fails, see the device Failure Log for the cause of the failure and suggested actions.
7. If a test result is anything other than Successful or Failure, look at the Test Activity Log for the device.