HP e3000 MPE/iX Release 7.0 System Software Maintenance Manual (30216-90317)
456 AppendixH
Error Messages and Warnings
Stage/iX Messages (STAGEMAN)
Cause STAGEMAN received a bad status from the HPFOPEN
intrinsic while attempting to open a staged file for getting
data on the file.
Action Determine why the file open failed. If you can determine
and fix the problem re-execute the command (or restart
the Patch/iX process). Otherwise, contact your
Hewlett-Packard Response Center for assistance.
1139 Message Failed in FFILEINFO call for file “name”. (STAGEMAN
1139)
Cause STAGEMAN received a bad status from the FFILEINFO
intrinsic while attempting to get data on a staged file.
Action Contact your Hewlett-Packard Response Center for
assistance.
1140 Message Failed to open file “name” for getting LIF information.
(STAGEMAN 1140)
Cause STAGEMAN could not open the file. The reason is stated
in the file system error message that appears above this
one.
Action Determine why the file could not be opened, correct the
problem, then re-execute the command or process.
1141 Message Failed in FFILEINFO call for file “name”. (STAGEMAN
1141)
Cause STAGEMAN received a bad status from the FFILEINFO
intrinsic while attempting to get data on the file (this data
is needed for placing an entry for the file in the system LIF
Directory so that the file is accessible from the ISL
prompt).
Action Contact your Hewlett-Packard Response Center for
assistance.
1142 Message Failed to get the sector address of file “name”.
(STAGEMAN 1142)
Cause STAGEMAN received a bad status from an internal
routine while attempting to get the sector address of the
file (this address is needed for placing an entry for the file
in the system LIF Directory so that the file is accessible
from the ISL prompt).
Action Contact your Hewlett-Packard Response Center for
assistance.
1143 Message Got a bad sector address on file “name”. Address = value
(STAGEMAN 1143)
Cause STAGEMAN got a sector address on the file that was less
than or equal to zero (this address is needed for placing an