HP e3000 MPE/iX Release 7.0 System Software Maintenance Manual (30216-90317)

402 AppendixH
Error Messages and Warnings
Installer Error Messages (INSTERR)
• Contact the Response Center if further assistance is
required.
159 Message File command error occurred for filename file.
(INSTERR #159)
Cause Setting a file equation required by Patch selector failed.
Action • FILE Command Table is possibly full.
• Check if any further file commands can be entered with
the file command.
• RESET any USER file equations.
• Take appropriate corrective measures and run the
installer again.
• Contact the Response Center if further assistance is
required.
160 Message HPCIPUTVAR failed in create_AUXHDR. (INSTERR
#160)
Cause The installer issued the HPCIPUTVAR intrinsic, and it
failed. The status returned for the intrinsic is displayed
before this message.
Action • Check the error message from the HPCIPUTVAR
intrinsic and based on the status value displayed, take
corrective action.
• Run the installer again.
• Contact the Response Center for further assistance.
161 Message HPCIGETVAR failed in create_AUXHDR. (INSTERR
#161)
Cause The installer issued the HPCIGETVAR intrinsic and it
failed. The status returned for the intrinsic is displayed
before this message.
Action • Check the error message from the HPCIGETVAR
intrinsic and based on the status value displayed, take
corrective action.
• Run the installer again.
• Contact the Response Center if further assistance is
required.
162 Message HPCIDELETEVAR failed in create_AUXHDR. (INSTERR
#162)
Cause The installer issued the HPCIDELETEVAR intrinsic and
it failed. The status returned for the intrinsic is displayed
before this message.
Action • Check the error message from the HPCIDELETEVAR