HP e3000 MPE/iX Release 7.0 System Software Maintenance Manual (30216-90317)

314 AppendixG
HP Stage/iX Reference
HP Stage/iX Commands
The name of the command. This parameter is optional. If you omit the command name,
STAGEMAN displays information about all commands.
(keyword) : (optional)
Default: DESC
Defines which part of the help text you would like printed.
DESC — Show the command’s description and syntax.
PARMS — Show the command’s parameters only.
EXAMPLE- — Show command usage examples only.
ALL — Show all help text related to the command.
Example
To get information about the INITIALIZE command, enter:
STAGEMAN> HELP INITIALIZE
To get examples on how to use the LIST command, enter:
STAGEMAN> HELP LIST EXAMPLE
IMPORT
The IMPORT command accepts a staging area from another system into the HP Stage/iX
environment on the local system. See the help discussion under EXPORT for more
information.
Syntax
IMPORT [STAGE=] stage_name [;{NOUNPACK}] {TAPE } {UNPACK }
Parameters
[STAGE=]stage_name (required)
The name of the staging area to be imported.
[;{NOUNPACK}] (optional) {TAPE } {UNPACK }
The import option. The default is NOUNPACK.
Example
STAGEMAN> IMPORT STAGE1;TAPE
INITIALIZE (INIT)
The INITIALIZE command is used to set up the various data structures and directories
that the HP Stage/iX facility requires to operate.
STAGEMAN always verifies that the HP Stage/iX facility is correctly initialized. If HP
Stage/iX is not correctly initialize, STAGEMAN will print out a warning message.
The INITIALIZE command is non-destructive. It can be typed at anytime to re-initialize