HP e3000 MPE/iX Release 7.0 System Software Maintenance Manual (30216-90317)

108 Chapter5
Modifying Your System
5.1 Securing and Backing Up the System for Tape Tasks
5.1 Securing and Backing Up the System for Tape Tasks
To prepare and secure the system for updating:
1. From the console, log on with the following conditions, or if already logged on, change
group to PUB.
:HELLO MANAGER.SYS,PUB;HIPRI
or
:CHGROUP PUB
2. If you are performing an Update, go to Step 3.
If you are performing an Add-on, go to Step 4.
Update Tasks
3. Run HP Predictive Support and turn it off.
If you are using the HP Predictive Support software as part of your Hewlett-Packard
hardware support contract, ensure that an HP Predictive Support run completes
successfully.
a. Issue the HP Predictive Support command:
:RUN PSCONFIG.PRED.SYS
This run of HP Predictive Support may include a transfer of files to the
Hewlett-Packard Response Center. If a transfer is needed,
be sure it completes
because the system update overwrites the information in the file
PSDCFILE.PRED.SYS.
b. Select item 4, Configuration, from the Main menu.
c. Select item 5, Schedule, from the Configuration Options menu.
d. Select item 1, Schedule (ON/OFF), from the Schedule menu.
e. Set the preference, at the prompt, type OFF:
Type schedule preference (on/off) or // to cancel: __
f. Exit the program, at the prompt, type EXIT:
Type an item number, an item key, or a command: __
g. Save the values, at the prompt, type YES:
Do you wish to save these values (Y/N)?__
h. Go to Step 4.
Update and Add-On Tasks
4. Lower session and job limits.
:LIMIT0,0