HP e3000 Fibre Channel Mass Storage Adapters Service and User Manual (32650-90910)

Chapter 4
Troubleshooting
HP Support Tools Manager (STM) under MPE/iX
33
Product: FC Interface
Product Qualifier: HP6795A_Tachyon_XL2
Logger: FC_DAM
Device Type: Interface
Device Qualifier: FibreTL
---------------------------------------------------------------------------
I/O Log Event Information:
I/O Event Class - Software Triggered Event
I/O Transaction Number - 0x00000000
Length of Hardware Status Logged - 0 bytes
Length of Driver Information Logged - 144 bytes
Low Level I/O (LLIO) Status: 0x11ff03e7
Subsystem field = 999; Proc. Num. = -1; Error Num. = 17
Severity Level: Information
Fibre Channel Driver received an ERQ Frozen interrupt from
the adapter.
Raw manager data:
0x0000: 00 00 00 06 17 D3 7C 80 00 00 00 00 00 00 00 01
0x0010: 43 54 44 49 53 52 2E 43 43 57 53 49 4F 2E 54 4C
0x0020: 32 47 53 55 42 4D 00 7A 00 00 00 00 C0 21 00 08
0x0030: 00 00 00 0A 02 1D 92 F0 00 91 DB 18 83 FC EB 04
0x0040: 08 00 45 00 00 00 00 0B FF FA 20 00 FF FA 20 00
0x0050: 00 00 00 08 00 00 00 0A 00 00 14 51 07 00 FF FF
0x0060: FF FF FF FF 00 10 83 FC EB 04 08 00 D5 D2 3D 50
0x0070: D5 D2 1D 50 00 00 00 01 00 00 00 08 00 00 00 00
0x0080: D4 01 54 00 D4 01 54 00 00 00 00 00 00 00 10 00
=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-
• Diagnose tool runs a loopback test on a Fibre Channel adapter. This test is destructive and should only be
run by qualified personnel.