HP ARPA File Transfer Protocol User's Guide (36957-90159)

96 AppendixB
Error Messages
FTP Server Messages and Errors
ACTION: Specify a parameter which is supported.
530 MESSAGE: User log on unsuccessful
CAUSE: The server received a user account and/or password which were not valid.
ACTION: Specify the correct user account and password. If the user is sure that they are
correct, notify the network manager and have him/her refer to the Installing and
Managing HP ARPA File Transfer Protocol Network Manager’s Guide.
530 MESSAGE: Please login with USER and PASS.
CAUSE: The user entered a command without being logged onto the FTP server.
ACTION: Log on with the USER command, then enter the command again.
550 MESSAGE: File request not taken: !
CAUSE: An MPE/iX File System error was received. The parameter will contain the text of
the specific File System error.
ACTION: Refer to the MPE/iX Error Messages Manual (Volume 1, 2 and 3).
553 MESSAGE: Illegal file name
CAUSE: The file name specified was not a valid MPE/iX file name.
ACTION: Use the correct file name format: either filename or filename.group.account
where each file name part is up to eight alphanumeric characters, beginning with an
alphabetic character.