High-Level Screen Management Intrinsic Library Reference Manual (32424-90002)

3- 28
following values:
0 = ignore
1 = automatically
read the terminal.
The read termination
item will always be
identified as the
ENTER key.
bypassfeature A four-byte integer
that will be used for
future Hi-Li
implementations. At
that time, you must
supply the globalpak
subparameter,
expectedvuf , with a
value equal to or
greater than A.00.10.
For this release of
Hi-Li software, set
bypassfeature to
zero.
readitems A compound parameter used by the application to
define valid read termination items, (keys and
fields), and the tasks HPDREAD is to perform
following the termination of the physical read.
This information is used as input to HPDREAD.
It is made up of the following subparameters:
itemcnt A four-byte integer
that indicates the
number of active
termination item
entries. Setting
itemcnt to zero tells
HPDREAD to use
implicit read key
definitions, that is,
read, edit, and
report errors on key
0, and interrupt only
on function keys 1
through n and fields
1 through n. This is
the same as options 2
and 0, respectively,
of the readopt
subparameter
discussed later under
the HPDREAD
intrinsic.
itementry Identifies a table
defined in your
application that
contains termination
item types,
termination items,
and read options.
itemtype A four-byte integer
that indicates the
termination item
type, a key or field.
The values you can
use are:
0 = key