High-Level Screen Management Intrinsic Library Reference Manual (32424-90002)

D-: 2
terminals on FORMSPEC's Terminal/Language Selection Menu.
The HP 2392A Terminal. To use the security display enhancement feature
on this terminal, you must specify the HP 262X and HP 239X family of
terminals on FORMSPEC's Terminal/Language Selection Menu.
The HP 2393A Terminal. To use the security display enhancement feature
on this terminal, you must specify the HP 262X and HP 239X family of
terminals on FORMSPEC's Terminal/Language Selection Menu.
The HP 2394A Terminal. To use the local edits and the security display
enhancement features of this terminal, you must specify the HP 262X and
HP 239X family of terminals on FORMSPEC's Terminal/Language Selection
Menu.
The HP 2397A Terminal. To use the color display enhancement feature of
this terminal, you must specify both the HP 262X and HP 239X and the HP
2627 and HP 2397A families of terminals on FORMSPEC's Terminal/Language
Selection Menu.
The HP 262X Terminals
You can run Hi-Li on the HP 262X family of terminals without specifying
HP 262X or HP 239X on the FORMSPEC Terminal/Language Selection Menu
except for special cases that are documented below.
The X.25 block mode feature is available via a PAD interface with all HP
262X terminals except the HP 2624A. To use this feature, you must be sure
that the transmit and receive pacing is set correctly, the appropriate
ROMS are used, and the terminal is strapped correctly. The HP 2625A and
HP 2628A terminals will always have the correct ROMS. In addition, you
must use the correct terminal type when you log on to the terminal. For
complete information about using the X.25 block mode feature, see the
DSN/X.25 HP 3000 Reference Manual (Part No. 32191-90001).
The HP 2624 Terminal. To use the local edits and security display
enhancement features on this terminal, you must specify the HP 262X and
HP 239X families of terminals on the FORMSPEC Terminal/Language Selec-
tion Menu.
When using a form, the terminal can issue the following message at run
time:
LINE IS FULL - RETURN TO CLEAR.
This message means that there are too many characters on the line. You
must redesign and recompile the form.
The HP 2624B Terminal. To use the local edits and security display
enhancement features on this terminal, you must specify the HP 262X and
HP 239X families of terminals on the FORMSPEC Terminal/Language Selec-
tion Menu.