High Availability FailOver/iX Manual (32650-90911)

Configuration

DELCONF (de)

To remove a configuration that is incorrect or is no longer desired, use the

DELCONF

command. The syntax is:

DE <Ldev>

For example:

ha> de 350

ha> li

Ldev Primary Path Alternate Path Timeout

===== ==================== ================== =======

351 0/4/0/0.70954.24 0/6/0/0.73289 True

352 0/6/0/0.73289.25 0/4/0/0.70954 False

353 0/6/0/0.73289.26 0/4/0/0.70954 False

450 0/6/2/1.3.3 0/6/2/0 True

451 0/6/2/1.3.4 0/6/2/0 True

452 0/6/2/0.3.5 0/6/2/1 False

453 0/6/2/0.3.6 0/6/2/1 False

NOTE

A system Reboot is required after a

DELCONF

command to permanently removed

an LDEV from the HAFOCONF file. A reboot is not required if you do a

delconf

followed immediately by an

addconf

to change the timeout parameter

setting.