Configuring Systems for Terminals, Printers, and Other Serial Devices (32022-90057)

Configuring Serial Devices (for PC-Based Management)
Modify the Network Management Configuration File
Chapter 6
91
3. Use the default network directory file NSDIR.NET.SYS for X.25 network
management, if you have X.25 connection.
4. The Password field is optional. Refer to the Using the Node Management Services
manual if you want to set a password.
5. Press the
[Open Config]
key.
Step 3: Configure the Local Node Name
The Main screen is displayed (Figure 6-2). This screen lets you specify the HP 3000’s
node name. It also asks whether you are using the HP 3000 or an OpenView Windows
Workstation to manage the DTCs, and if you are using X.25 or PAD.
Figure 6-2 Main Screen
1. Assign a node name to the HP e3000 Make sure this node name is the same as the
one you specified for this computer in the OpenView DTC Manager.
2. Enter Y to the question, “Are you using the OpenView DTC Manager?.”
3. If you have PAD or X.25, enter Y to the question, “Do you have X.25
system-to-system or PAD connections?.”
4. Press the
[Save Data]
key.
5. Press the
[DTS]
key.