Configuring Systems for Terminals, Printers, and Other Serial Devices (32022-90057)

Dynamic Configuration and DTS Shutdown/Restart
Dynamic Configuration
Chapter 4
55
Table 4-1 Dynamically Configurable Tasks
Task
Action Required for Change to
Become Active
Add/configure new terminal/printer No action; changes take effect
dynamically
Add/delete class name
Change DTC event logging class
Host-based X.25 configuration changes:
– Global PAD Access lists
– System to System Local User Group table
– System to System Switching table
– Maximum number of PAD Connections
– PAD Switching table
– Incoming PAD Security table
Change SNMP filter
Change NLIO from N to Y in terminal profile
Increase number of non-nailed TIO/PAD ports
Change terminal to printer or vice versa* Logoff any sessions or close any
jobs associated with changed
devices. If device is a printer, stop
the spooler.
Change device profile characteristics:
– change line speed