Configuring Systems for Terminals, Printers, and Other Serial Devices (32022-90057)

Dynamic Configuration and DTS Shutdown/Restart
Chapter 4
53
4 Dynamic Configuration and DTS
Shutdown/Restart
This chapter describes how you can make most DTS configuration changes dynamically
using NMMGR without rebooting the system (herein referred to as dynamic
configuration. Such configuration changes include adding/deleting/ modifying terminals,
printers, and DTCs.
This chapter also discusses the DTS subsystem shutdown and restart capabilities
provided through the DTCCNTRL command.
Refer to Chapters 5 and 6 for detailed steps on the DTS configuration process for
host-based and PC-based DTC management, respectively.
NOTE To automatically add/configure a host-based managed DTC to DTS without needing to
specify detailed configuration information such as DTC cards/boards and ldevs, refer to
Chapter 3, “Automatic Configuration of DTCs.” To manage/dynamically configure
host-based X.25 links, refer to the Configuring and Managing Host-Based X.25 Links
manual.