Configuring Systems for Terminals, Printers, and Other Serial Devices (32022-90057)

Preparing to Configure DTCs
DTS Configuration Worksheets
Chapter 2
42
HP e3000 DTC Configuration Worksheet
Fill out worksheet as shown in Figure 2-2 with configuration information as needed.
Figure 2-2 DTC Configuration Worksheet
DTC type (check one): DTC72MX: ____ DTC16iX: ____ DTC16MX/RX: ____
DTC48: ____ DTC 16: ____
DTC Name:
DTC LAN Station Address:
DTC Node Name:
(Node.Domain.Organization)
DTC IP Address:
Notes:
DTC Card Type can be: Number of Cards
DTC 72MX: L (LAN) DTC 72MX: 4
A (Async card DTC 48 6
X (X.25 card) DTC 16 3
DTC 48/16: D (direct connect)
M (modem connect)
X (X.25 card)
DTC Configuration Worksheet
Use one worksheet for each DTC
Event Logging Classes: (Y/N)
1. 2.
3.
4. 5. 6.
Card Types Installed
in the DTC:
Card # Type:
0
1
2
3
4
5
Enable RAFCP Front End:
Enable Automatic Restart:
Enable RAFCP and Auto Restart available on DTCs as follows:
DTC16 DTC48 DTC16iX DTC16MX DTC72MX
RAFCP No No No Yes Yes
Auto Restart
Available for Host-Based X.25 Management only