Configuring Systems for Terminals, Printers, and Other Serial Devices (32022-90057)

RAFCP Theory of Operation
Routable AFCP Example Configuration
Appendix D
215
Routable AFCP Example Configuration
This section describes how to setup and configure the DTCs and the management
platform for Routable AFCP. Figure 1-6 is a figure that shows the topology of the
hardware needed. The detailed configuration paramters that apply to this figure are
listed below. In the figure below Uppercase names are NS domain names and lowercase
names are Arpa Domain Names.
Figure D-1 Routable AFCP Example Configuration
Incoming connections through RAFCP are established by the following process
IP Network
DTC
Manager
Platform
HP e3000
Series 900
DTC
Manager
Platform
Router
Router
Router
RDTC
FEDTC
TITAN.NET.HP
DNS Server
mimas.test3.net.hp
15.137.25.199
rout03.test3.net.hp
15.137.25.192
FEDTC1.NET.HP
fedtc1.test1.net.hp
15.137.17.188
rout01.test1.net.hp
15.137.17.192
RDTC1.NET.HP
rdtc1.test2.net.hp
192.200.200.234
rout02.test2.net.hp
192.200.200.100
(5)
(8)
(3)
(2)
(1)
(4)
(7)
(6)
DTC> c titan