Configuring Systems for Terminals, Printers, and Other Serial Devices (32022-90057)

Using NMMGR in Maintenance Mode
Maintenance Mode Commands
Appendix A
189
NOTE Subsystem break (
[CTRL]Y
) may be used to interrupt the operation of the COPYCONF,
DELETENODE, HELP, LISTDIR, MAKESTREAM and MERGEDIR commands. The EXPANDDIR
command cannot be interrupted.
READALLCONF READALLCONF
[;FORMAT]
Reads all data from
the current
configuration record.
READCONF READCONF
fieldname [;FORMAT]
Reads selected data
from the current
configuration record.
SUMMARYCONF SUMMARYCONF
subsysem[,
subsystem[, ...]]
Prints a report for
one or more
communications
subsystems.
UPDATECONF UPDATECONF Updates the current
path in the
configuration file.
VALIDATECONF VALIDATECONF
subsystem
Validates subsystem
configuration.
VERSIONCONF VERSIONCONF
version
Checks whether the
specified version
number matches
NMMGR's current
version number.
WRITECONF WRITECONF
fieldname, data
Writes data to
individual fields of
the current path in
the configuration file.
Table A-1 NMMGR Maintenance Mode Commands (Continued)
Command Syntax Action