Configuring Systems for Terminals, Printers, and Other Serial Devices (32022-90057)

Using NMMGR in Maintenance Mode
Maintenance Mode Commands
Appendix A
186
CARDCONF CARDCONF cardno Sets the current DTC
card number for the
READALLCONF,
READCONF,
UPDATECONF, and
WRITECONF
commands.
COMPRESSCONF CARDCONF cardno Compresses or
expands the current
configuration file.
CONTINUE CONTINUE [ON or
OFF]
Prevents NMMGR
from terminating in a
job because of a
maintenance mode
error.
COPYCONF COPYCONF
srcpath[:srcfile]
[,[destpath]
[:destfle]][;KEEP]
[;NOVERS]
Copies a
configuration subtree
DELETECONF DELETECONF path Deletes a subtree
from the current
configuration file.
DELETENODE DELETENODE
[nodename]
[:LOCAL]
[:GLOBAL]
Deletes an entry from
the network
directory.
DTSDYNCONF DTSDYNCONF
ON or OFF or
PERMOFF]
Control the display of
the dynamic
configuration
question and
execution of
DTCCNTRL when
DTS validation is
complete.
DTSXVAL DTSXVAL
[ON or OFF]
Enable or suppress
automatic
cross-validation with
SYSGEN.
EXIT EXIT Exits from
maintenance mode.
Table A-1 NMMGR Maintenance Mode Commands (Continued)
Command Syntax Action