Configuring Systems for Terminals, Printers, and Other Serial Devices (32022-90057)

Using NMMGR in Maintenance Mode
Maintenance Mode Commands
Appendix A
185
Maintenance Mode Commands
Table A-1 lists the NMMGR maintenance mode commands, their syntax, and the actions
they perform.
NOTE Subsystem break (
[CTRL]Y
) may be used to interrupt the operation of the COPYCONF,
DELETENODE, HELP, LISTDIR, MAKESTREAM and MERGEDIR commands. The EXPANDDIR
command cannot be interrupted.
The VERSIONCONF command must be used before the PATHCONF command, which must be
used before the READCONF, READALLCONF, WRITECONF, and UPDATECONF commands to
define the current path.
Table A-1 NMMGR Maintenance Mode Commands
Command Syntax Action
:MPECommand Syntax for
MPECommand
Executes
MPECommand.
MPECommand must
be a
programmatically
executable MPE
command.
ADDCONF ADDCONF pathname
[type]
Adds subtree of
empty records to the
configuration file.
ADDLDEV ADDLEV
{dtcname}
{dtc-nodename}
{station-address]
[filename] Adds LDEVs to a
DTC card.
ADDLU ADDLU
SNAnodename
[filename]
Adds LUs to the SNA
node transport
screen.
ADDNODE ADDNODE
[filename]
Adds or updates a
node in the current
network directory.
ADDVC ADDVC
[filename
Adds a virtual circuit
address key to the
network directory
and to the
configuration file.