Manualshelf

Configuring Systems for Terminals, Printers, and Other Serial Devices (32022-90057)

ManualsBrandsHP ManualsSoftwareMPE/iX 7.5 Operating System
11121314151617181920
16
Configuration At a Glance
Before configuring your HP e3000 to use the DTC terminal servers, you must have
completed the following tasks. These tasks are not covered in this manual:
1. Set up your HP e3000 and make sure it is operational. Refer to your HP e3000
installation manual.
2. Install the DTC terminal servers on your LAN and connect the serial devices to the
DTC terminal servers. Refer to your DTC Hardware Installation Guide.