Configuring Systems for Terminals, Printers, and Other Serial Devices (32022-90057)

Terminal and Printer Profiles
Host Profile Screen (Host-Based)
Chapter 7
132
Host Profile Screen (Host-Based)
Figure 7-10 displays the new Host Profile screen. Use this screen to configure host ports
for back-to-back.
Path name: DTS.PROFILE.profname
Figure 7-10 Host Profile Screen
Review the profile settings on the screen. Use the
[Tab]
key to move from field to field.
Make changes as needed by typing over the current values. When you have made the
desired changes, press the
[Save Data]
key. Refer to the “Fields” subsection for detailed
information about each field on the screen.
Press the
[Prior Screen]
key to return to the Profile Selection screen.
Fields Host name Names the port. Field can be a node name up to 16 characters long or
an IP address in the format xxx.xxx.xxx.xxx. If a node name is
entered, the domain and organization names from the DTC node name
will be taken to form a fully-qualified host node name. Also, if a node
name is entered, the IP address of the DTC configured with this host
port must be entered in the “DTC IP Address” field on the DTC
Configuration screen (Figure 5-5 displays the DTC 72MX
Configuration screen as an example).