Configuring Systems for Terminals, Printers, and Other Serial Devices (32022-90057)

Terminal and Printer Profiles
Terminal Profile Screen (PC-Based)
Chapter 7
120
Terminal Profile Screen (PC-Based)
Figure 7-4 shows a Terminal Profile screen for PC-based management. Note that you
only need to configure a terminal profile for nailed terminals if you are using PC-based
management. Nailed terminals are ports with permanent ldevs assigned to them and
can be accessed programmatically.
Figure 7-4 Terminal Profile Screen (PC-Based)
NOTE The Terminal Profile screen used for PC-based management contains a subset of the
fields used by host-based management (Figure 7-2). Refer to the previous subsection for
an explanation of the fields.
The reason PC-based terminal profiles contain fewer fields is that most terminal
characteristics are defined in the OpenView DTC Manager (on the PC).