Configuring Systems for Terminals, Printers, and Other Serial Devices (32022-90057)

Terminal and Printer Profiles
Terminal Switching Configuration Screen
Chapter 7
117
Terminal Switching Configuration Screen
Figure 7-3 displays the Terminal Switching Configuration screen. You can reach this
screen by pressing
[F5]
, the
[Go To Switch]
function key, at the Terminal Profile screen.
The Terminal Switching Configuration screen allows you to configure host-based
terminal switching parameters.
Path name: DTS.PROFILE.profname.SWITCH
Figure 7-3 Terminal Switching Configuration Screen
Review the profile settings on the screen. Use the
[Tab]
key to move from field to field.
Make changes as needed by typing over the current values. When you have made the
desired changes, press the
[Save Data]
key. Refer to the “Fields” subsection for detailed
information about each field on the screen.
Press the
[Prior Screen]
key to return to the Terminal Profile screen.
Fields Terminal name Optional field which specifies the terminal port name. You may enter
up to 16 characters or an IP address. For routable back-to-back
environments, this field must contain a valid IP address for the
terminal port in the format xxx.xxx.xxx.xxx, where xxx is a number
from 0–255.