Configuring Systems for Terminals, Printers, and Other Serial Devices (32022-90057)

Configuring Serial Devices (for PC-Based Management)
Modify the Network Management Configuration File
Chapter 6
100
clear (cl)(c) exit (ex)(e) help (he)(h) oclose (oc)
redo
sysgen> PERMYES ON
sysgen> BA CONFIG
sysgen> SY
** SYSFILE configurator commands **
aauto (aa) aboot (ab) acmsl (ac) asprog (as)
cmsl (cm) dauto (da) dboot (db) dcmsl (dc)
dsprog (ds) lcmsl (lc) rauto (ra) rboot (rb)
rcat (rc) rcmsl (rcm) rdcc (rd) ripl (ri)
rnmlib (rn) rsprog (rs) show (sh)
clear (cl)(c) exit (ex)(e) help (he)(h) hold (ho)
sysfile> RDCC
**note** Retrieving NMMGR configuration data...
sysfile> HO
sysfile> EX
sysgen> KE
keeping to group CONFIG.SYS
Purge old configuration (yes/no)?Automatic yes
** configuration files successfully saved **
sysgen> EX
Cross-validation with SYSGEN was successful.
Copying validated configuration file to backup file, please wait ***
3. After successful validation and cross-validation, and if the file in use is
NMCONFIG.PUB.SYS, the following prompt will appear:
Do you want DTS changes to be become active now (Y/N)?
Y = all changes made take effect now