Configuring Systems for Terminals, Printers, and Other Serial Devices (32022-90051)

Chapter 6 95
Configuring Serial Devices (for PC-Based Management)
Modify the Network Management Configuration File
Step 2: Open the Network Management
Configuration File
Invoke NMMGR, the Open Configuration/Directory File screen as
shown in Figure 6-1, allows you to specify the configuration file name.
Figure 6-1 Open configuration/Directory Screen
1. Use the default configuration file name, NMCONFIG.PUB.SYS.
2. Enter a backup configuration file name. The default is
NMCBACK.PUB.SYS.
3. Use the default network directory file NSDIR.NET.SYS for X.25
network management, if you have X.25 connection.
4. The Password field is optional. Refer to the Using the Node
Management Services manual if you want to set a password.
5. Press the
[Open Config] key.