Configuring Systems for Terminals, Printers, and Other Serial Devices (32022-90051)

226 AppendixD
Error Messages
Validation Error Messages
Path: NMMGRpath — PAD device name for LDEV #nnn is being used
at DTS.DTCPC.SELECT.DTCname.CARD345.PAD4. (DTSERR=48)
(DTSERR 48) Cause: The same logical device (ldev) number is used more than once.
Action: Remove the duplicate ldev number.
Path: NMMGRpath — PAD device name for LDEV #nnn is being used
at DTS.DTCPC.SELECT.DTCname.CARD345.PAD5. (DTSERR=49)
(DTSERR 49) Cause: The same logical device (ldev) number is used more than once.
Action: Remove the duplicate ldev number.
Path: NMMGRpath — The same LDEV #nnn is being used at
DTS.DTCPC.SELECT.DTCname.CARD012. (DTSERR=50)
(DTSERR 50) Cause: The logical device (ldev) number is used more than once in the
CARD012 configuration.
Action: Remove any duplicate references to the ldev number.
Path: NMMGRpath — The same LDEV #nnn is being used at
DTS.DTCPC.SELECT.DTCname.CARD345. (DTSERR=51)
(DTSERR 51) Cause: The logical device (ldev) number is used more than once in the
CARD345 configuration.
Action: Remove any duplicate references to the ldev number.
Path: NMMGRpath — The same node name is being used at linkname.
(DTSERR=52)
(DTSERR 52) Cause: The same node name is used more than once.
Action: Remove the duplicate reference to the node name.
Path: NMMGRpath — Blank NODENAME. (DTSERR=53)
(DTSERR 53) Cause: A host node name is not specified on the screen specified in the
path.
Action: Enter a host node name on the screen specified in the path.
Path: NMMGRpath — The profile for LDEV #nnn, profilename, is not
defined. (DTSERR=54)
(DTSERR 54) Cause: An incorrect profile name was used for the logical device (ldev).
Action: Verify the profile name for the logical device in the DTS
Profile Selection screen.
Path: NMMGRpath — Too many ldevs are configured using device
class name devicename (max allowed num = 255). (DTSERR=55)
(DTSERR 55) Cause: Too many logical devices are configured under the specified
device class name. The maximum allowed is 255.
Action: Reduce the number of logical devices configured under the
specified device class name.