Configuring Systems for Terminals, Printers, and Other Serial Devices (32022-90051)

204 AppendixA
Using NMMGR in Maintenance Mode
Maintenance Mode Commands
Maintenance Mode Commands
Table A-1 lists the NMMGR maintenance mode commands, their
syntax, and the actions they perform.
NOTE Subsystem break ([CTRL]Y) may be used to interrupt the operation of
the COPYCONF, DELETENODE, HELP, LISTDIR, MAKESTREAM and
MERGEDIR commands. The EXPANDDIR command cannot be
interrupted.
The VERSIONCONF command must be used before the PATHCONF
command, which must be used before the READCONF, READALLCONF,
WRITECONF, and UPDATECONF commands to define the current path.
Table A-1 NMMGR Maintenance Mode Commands
Command Syntax Action
:MPECommand Syntax for MPECommand Executes
MPECommand.
MPECommand
must be a
programmatically
executable MPE
command.
ADDCONF
ADDCONF pathname [type] Adds subtree of
empty records to the
configuration file.
ADDLDEV
ADDLEV
{dtcname}
{dtc-nodename}
{station-address
[filename]
Adds LDEVs to a
DTC card.
ADDLU
ADDLU SNAnodename [filename] Adds LUs to the
SNA node transport
screen.
ADDNODE
ADDNODE [filename] Adds or updates a
node in the current
network directory.
ADDVC
ADDVC [filename Adds a virtual
circuit address key
to the network
directory and to the
configuration file.
CARDCONF
CARDCONF cardno Sets the current
DTC card number
for the
READALLCONF,
READCONF,
UPDATECONF,and
WRITECONF
commands.