Configuring Systems for Terminals, Printers, and Other Serial Devices (32022-90051)

Chapter 7 135
Terminal and Printer Profiles
Printer Switching Configuration Screen
Printer Switching Configuration Screen
Figure 7-6 displays the Printer Switching Configuration screen. You
can reach this screen by pressing [F5], the [Go To Switch] function key,
at the Printer Profile screen. Use the Printer Switching Configuration
screen to configure host-based printer switching parameters.
Path name: DTS.PROFILE.profname.SWITCH
Figure 7-6 Printer Switching Configuration Screen
Review the profile settings on the screen. Use the
[Tab] key to move
from field to field. Make changes as needed by typing over the current
values. When you have made the desired changes, press the
[Save Data]
key. Refer to the “Fields” subsection for detailed information about each
field on the screen.
Press the [Prior Screen] key to return to the Terminal Profile screen.
Printer
name Optional field which names the printer port. You may
enter up to 16 characters or an IP address. For routable
back-to-back environments, field must contain a valid
IP address for the printer port in the format
xxx.xxx.xxx.xxx