Configuring Systems for Terminals, Printers, and Other Serial Devices (32022-90051)

Chapter 6 105

Conﬁguring Serial Devices (for PC-Based Management)

Modify the Network Management Conﬁguration File

2. After validation of the network conﬁguration ﬁle is complete, the

following will appear on the screen as the ﬁle is cross-validated with

the ﬁles created with SYSGEN (warning messages may vary):

NMMGR will now cross-validate the NMCONFIG file with SYSGEN.

SYSGEN version E.02.00 : catalog version E.02.00 THU, DEC 4, 1997, 2:58 AM

**note** Retrieving NMMGR configuration data...

** First level command **

io log (lo) misc (mi) spu (sp)

sysfile (sy)

basegroup (ba) keep(ke) permyes (pe) show (sh)

tape (ta)

clear (cl)(c) exit (ex)(e) help (he)(h) oclose (oc)

redo

sysgen> PERMYES ON

sysgen> BA CONFIG

sysgen> SY

** SYSFILE configurator commands **

aauto (aa) aboot (ab) acmsl (ac) asprog (as)

cmsl (cm) dauto (da) dboot (db) dcmsl (dc)

dsprog (ds) lcmsl (lc) rauto (ra) rboot (rb)

rcat (rc) rcmsl (rcm) rdcc (rd) ripl (ri)

rnmlib (rn) rsprog (rs) show (sh)

clear (cl)(c) exit (ex)(e) help (he)(h) hold (ho)

sysfile> RDCC

**note** Retrieving NMMGR configuration data...

sysfile> HO

sysfile> EX

sysgen> KE

keeping to group CONFIG.SYS

Purge old configuration (yes/no)?Automatic yes

** configuration files successfully saved **

sysgen> EX

Cross-validation with SYSGEN was successful.

Copying validated configuration file to backup file, please wait ***