Configuring and Managing MPE/iX Internet Services (July 2001)

126 Chapter7
Samba for MPE/iX Services
Troubleshooting Samba for MPE/iX Server
Using Logfiles of Samba for MPE/iX
In case of problems, check for the job listings for useful error messages
and also look into the Samba for MPE/iX log file
/usr/local/samba/var/log.smb and log.nmb for hints. You can
control the amount of log messages with the “debug level” directive
inside the config file smb.conf.
Increasing the log level to 3 or 4 can shed light on the cause of most
problems. This also may lead to a large amount of details to be logged
into these files.
You may have to increase the size of your log file if your debug level is
more than 3.
NOTE Before using the logging feature of Samba for MPE/iX, make sure you
check the Electronic Support Center (ESC) for information on any
possible Samba for MPE/iX problems, (use of the HP Electronic Support
Center is governed by the HP Electronic Support Center Terms and
Conditions.) URL: http://us-support.external.hp.com/B.