Configuring and Managing Host-Based X.25 Links - Edition 6 (36939-90057)

Configuring DTCs Step-by-Step
Modify the Network Management Configuration File
Chapter 3
62
Modify the Network Management Configuration File
The network management configuration file (NMCONFIG.PUB.SYS) contains information
that is referenced during system boot-up. A step-by-step procedure for creating or
updating the host’s network management configuration file follows.
NOTE Before modifying the NMCONFIG.PUB.SYS file, make a backup copy of it. If the
modifications made to the configuration file are successful, purge the backup copy.
Step 1: Begin the Configuration Process
Run the NMMGR program. Node manager (NM) or network administrator (NA)
capabilities are required to run this program. To run NMMGR, enter the following
command at the MPE prompt and then press the
[Return]
key.
NMMGR.PUB.SYS
NOTE You must be logged on to the SYS account to modify the configuration file.