Configuring and Managing Host-Based X.25 Links - Edition 6 (36939-90057)

Error Messages
Validation Error Messages
Appendix B
194
Action: Go back to the DTS Configuration screen and delete the link specified in the
NMMGRpath. Delete all unused links so that eight or less links are being used.
(DTSERR 19) Path: NMMGRpath — Too many paths are being used (max. number allowed =8).
Cause: The link specified in the NMMGRpath cannot be processed. Too many physical
paths are already defined.
Action: Go back to the DTS Configuration screen and delete the link specified in the
NMMGRpath. Delete all unused links so that eight or less links are being used.
(DTSERR 20) Path: NMMGRpath — Too many DTCs are being used (max. number allowed =120).
Cause: The DTC specified in the NMMGRpath cannot be processed. Too many DTCs are
already configured.
Action: Go back to the DTC Configuration screen and delete the DTC specified in the
NMMGRpath.
(DTSERR 21) Path: NMMGRpath — Too many nodes are being used (max. number allowed =129).
Cause: The DTC specified in the NMMGRpath cannot be processed. Too many nodes are
being used.
Action: Go back to the DTC Configuration screen and delete the DTC specified in the
NMMGRpath.
(DTSERR 22) Path: NMMGRpath — Too many classes are being used (max. number allowed =1000).
(DTSERR=22)
Cause: The total number of classes exceeds the maximum allowed number.
Action: Delete class names so that no more than 1000 different class names are
associated with asynchronous devices.
(DTSERR 23) Path: NMMGRpath — Too many profiles are being used (max. number allowed =1024).
(DTSERR=23)
Cause: The total number of defined profiles exceeds the maximum allowed.
Action: Delete profiles so that no more than 1024 are specified.
(DTSWARN 24) No link is defined. (DTSWARN=24)
Cause: A link is not configured.
Action: Without a configured link, the network management configuration file is
useless. Return to the configuration screens and add a link, making sure that all
necessary data records are created.
(DTSWARN 25) No DTC is defined.
Cause: A DTC is not configured.
Action: An action is not required if neither terminals, printers, nor both are needed. If
terminals and printers are required, return to the configuration screens and add a DTC,
making sure that all necessary data records are created.
(DTSWARN 26) Path: NMMGRpath — LINK.linkname is shared with network interface. (DTSWARN=26)
Cause: The same link is shared between the DTS and NS subsystem. A separate link
must exist for each of the two subsystems.
Action: Decide which of the two subsystems should use the existing link and configure
an additional link for the remaining subsystem.