Configuring and Managing Host-Based X.25 Links - Edition 6 (36939-90057)

Migrating from Previous Releases
Migrating your Configuration to Host-Based Management
Appendix A
189
subsystem. Although the DTS subsystem is correctly configured, you will not be able to
make changes to the DTS configuration until you update the NMCONFIG file to the latest
release with NMMGRVER.
Figure A-1 Convert DTS Screen
If you press the
[Do Convert]
key, NMMGR will automatically run NMMGRVER to allow you
to update the NMCONFIG file. Follow the instructions above “Running NMMGRVER to Update
Release Version”. When the update is complete, you can press the
[Prior Screen]
and
resume configuring the DTS subsystem.
NOTE Dynamic configuration will be disabled until you run DTCCNTRL and perform a SHUTDOWN
and RESTART of the DTS subsystem. See Chapter 7, “Managing Networks with
DTCCNTRL” for detail on how to shutdown and restart DTS.
Migrate NMCONFIG file to Host-based Management
One of the steps to migrate from PC-Based management to Host-Based Management is
to migrate the configuration of your DTCs from the PC-Based configuration to the
Host-Based configuration using the Host Migration tool integrated into NMMGRVER.
Before running the Host Migration tool review the section above “Your Host’s
Configuration is Currently PC-Based” and the section “Process for Migrating from
PC-Based to Host-Based DTC Management”. Complete any configuration tasks that are
needed prior to running the Host Migration tool.