Configuring and Managing Host-Based X.25 Links - Edition 6 (36939-90057)

Managing Networks with DTCCNTRL
DTS Shutdown and Restart
Chapter 7
161
DTS Shutdown and Restart
The DTS shutdown capability is provided by the DTCCNTRL command. It allows you to
bring down the entire DTS subsystem and includes the release of all TIO-related system
resources. DTCCNTRL requires that you have a minimum of System Manager (SM)
capability, this operation can only be done from the system console. When combined with
the DTS restart capability, you can resolve errors that may arise during Datacomm
Configurator (DCC) start-up without rebooting the HP 3000 host. If you see DCC error
messages, first fix any problems that caused the DCC startup error and then run
DTCCNTRL to shut down and restart DTS.
NOTE Issuing the DTCCNTRL command to perform a DTS shutdown will result in the deletion of
the entire DTS/TIO subsystem from the system. No TIO users can use the system while
it is shut down.
CAUTION When the “forced” option is invoked, then all sessions logged on to TIO devices will be
aborted and all spooled TIO printers will be stopped.
The DTS restart capability is provided by the DTCCNTRL command and allows you to
restart the DTS subsystem. This command can only be invoked after the DTS subsystem
has been shutdown. The DTS subsystem will be restarted in the same way that occurs
when the system is rebooted.